Printed Samples of Standard Sticker Materials and Inks:

see more examples

Ink Specifications:

Inks are for Indoor Use Only - Not Moisture Resistant; except for shipping
...labels. (For weather / waterproof  inks see the Weatherproof Stickers or
...Parking Permit Stickers Page.)

Recommendations for Ink & Material Combinations (as shown above):

The appearance of the ink color changes, according to the color of the material that
 it is printed on.
 ..... This is especially apparent with the non-standard ink color, white, in which the
 ..... material shows through, making the areas where the white ink is printed a light
 ..... shade of the color it is printed on.
 ..... Blue Ink on Yellow Gloss is NOT Recommended -- It appears as black.
 ..... Generally, Black Ink looks best on all Fluorescent colored materials.

Standard Materials Specifications:

Standard Materials for Indoor Use Only - Not Moisture Resistant
.. (White Gloss, Yellow Gloss, White Litho, Gold Foil, Silver Foil, Fluorescents)

Materials are Permanent Adhesive

Recommended Application Temperature: Above 40F (minimum +25F)
.. Service Temperature Range: -65F to +160F

Labels Do NOT apply to vinyl notebooks.
. (The vinyl causes a chemical reaction and breaks down the adhesive.)

Gloss or Foil Materials are not recommended for writing on.
 . White Litho/Matte and Fluorescent Materials can be written on.


Non-Standard Materials Specifications:

Clear Acetate:
Indoor Use Only
Permanent Adhesive
Application Temp: 40F minimum
Service Temp Range: -65F to +150F

White Vinyl:
Durable and weather resistant for 2 year Outdoor Use
Removable Adhesive for bumper stickers and
Permanent Adhesive for weatherproof stickers.
Application Temp: 50F minimum
Service Temp Range: -40F to +176F

Gold/Silver Brite/Brushed Polyester:
2 Year Outdoor Rated
Permanent Adhesive
Application Temp: 50F minimum
Service Temp Range: -40F to +212F

Clear Polyester:
2 Year Outdoor Rated
Permanent Adhesive
Application Temp: 50F minimum
Service Temp Range: -40F to +257F

White Polyester:
2 Year Outdoor Rated
Permanent Adhesive
Application Temp: 50F minimum
Service Temp Range: -40F to +302F

Freezer Adhesive on White Gloss:
Indoor Use Only - Not recommended for writing on
Permanent Adhesive
Application Temp: -20F minimum
Service Temp Range: -65F to +200F
Special Order: Add 10% to base price.

Blockout Adhesive on White Gloss or Matte:
(Opaque/Grey Adhesive):

Often used to cover up dated information or mistakes.
Indoor Use Only
Permanent Adhesive
Application Temp: 40F minimum
Service Temp Range: -65F to +180F
Special Order: Add 25% to base price.

Removable Adhesive on White Gloss or Matte:
Removable Adhesive becomes more adherent after remaining applied for a prolonged
amount of time -- Indoor Use Only
Application Temp: 10F minimum
Service Temp Range: -65F to +120F
No additional charge (on white material only) --
just make a note in special instructions .
For removable adhesive in other materials, please request a quote.
For Repositionable Adhesive (like what's on a "sticky note"), please request a quote.

________________________________

a-peeling stickers
21218 Appaloosa Dr., Elkhorn NE 68022
Phone 1-402-289-2273
FAX: 1-402-289-4392
www.a-peelingstickers.com

2001 a-peeling stickers